WIFI Installation Companies Long Island

WIFI Installations/Repairs Long Island

Are you struggling with poor Wifi connections or signals in your home or business? Now is the time to do something with just giving us at Techsonduty a call.  There are many factors that can cause Wifi issues and we know best.  We use the latest in home wireless technology that creates a seamless wifi network.  Our WIFI setup will ensure all you devices will connect and stay connected at all times.

WiFi Installation Companies Near Me

We offer free onsite Wifi consultations on Long Island to provide you with the best Wireless solutions.  Give us a call today to discuss 516-360-0757.

  • New Wireless/Wifi Installations
  • Access Point Installations
  • Wifi Survey / Network Evaluation
  • Network Wiring/Cabling Services
  • Wifi Router Setup
  • SSID setup/Wifi Password Recovery
  • Wireless Installation Nassau
  • Hotel/Motel Wifi Setup
  • Wide Range Wifi


WiFi uses radio signal on the 2.4ghz and 5ghz band to extend network connectivity to end user device. Both of these frequencies have a limited range before beginning to experience dissipation and subsequently a negative internet experience for end users. Structures such as walls, staircases, elevators, metal ducts and even our own bodies weaken WiFi signals at astonishing rates. (We recommend Ubiquiti Dual-Radio PRO Access Point for most home WiFi networks)

Have you ever wondered why your WiFi quality decreases drastically when you move from room to room or outside of your office or house? It is because the building materials between you and your access point are wreaking havoc on your wireless signal. If it’s confusing, below is a quick primer on how to measure WiFi signal and how certain building materials will impact it.

Understand WiFi Signal Strength & Impact Of Building Materials

There is a free app on the Apple and Android app stores called WiFi Analyzer. Download this app to measure the strength of your WiFi signal in your office or home. WiFi signal strength is measured in milliwatts but as that measurement can get a bit complex with very large, confusing numbers. We instead elect to use dBm (decibels relative to a milliwatt). A high dBm is -30 and this would translate to excellent signal strength, while a low dBM is -120 which is essentially a dead zone. You would want your WiFi signal to be between -60 dBm and -40 dBm. In many commercial instances the standard acceptable signal strength would be -50 dBm and above.

Let’s say you’re standing right by your access point and your signal strength is -40 dBm and you start moving past various structures in your office building. You’ll notice that your WiFi signal is gradually worsening and sometimes dramatically when you pass certain walls or structures

Your WiFi Network Can Be Slightly Impacted By Glass

Many offices choose to set up glass walls to separate conference rooms or individual offices. This modern aesthetic looks awesome but has a negative impact on wireless signal propagation. A standard clear window will reduce signal strength by about -4db. This number increases if the windows are double or triple paned or are treated to deflect light or insulate. If you conduct video conferences over WiFi in your glass-walled conference room and are already dealing with weak WiFi signals, the -4db reduction could cause huge issues.

Sheetrock & Insulation Will Further Reduce Your WiFi Signal Strength

Most walls are made out of sheetrock and in and of itself it does not have a massive effect on WiFi signals, only about -2db. You’re not out of the wood yet as materials between the sheetrock such as foam insulation, metal wiring or other structures can reduce signal strength even further.

Wood & WiFi Do Not Get Along

Wood makes up the majority of framework for homes and older office buildings. Besides being in the walls, wood can often be used for flooring, doors, and furniture within the house. Wood can reduce WiFi signal strength by -6db and that number only gets worse depending on the thickness of the wood or its water content. Thicker wood can reduce WiFi signal strength by -20db or more.

WiFi Will Not Be Stable With Just One Brick Wall

Brick is typically dense and thick, and WiFi signal usually become unusable with just one brick wall between an access point and the end user device. Brick reduces WiFi signal strength by an astonishing -28db! The mortar that holds the brick together doesn’t help either.

Metal Obstructs WiFi Signals & Creates Serious Dead Zones

Most modern commercial buildings are comprised of metal building materials. Metal does not get along with cellular signals so naturally, it is an enemy of WiFi as well. WiFi signals can be reduced by metal by almost -50db! It is one of the most important elements to plan around when you want to set up multiple access points on the same wireless network.

Even in a perfect wide open environment with none of the structures mentioned above, there can still be elements that will impact your wireless performance and require you to set up multiple APs on your wireless network.

Outside Interference From Nearby WiFi Networks Negatively Impacts Yours

The signal from nearby wireless networks and access points can impact performance on your network. Access points on the same channel can affect your network performance and cause dropped connections or lost packets while using the internet.

Not All WiFi Access Points Are Made To Support Densely Populated Areas

Human bodies are the worst when it comes to WiFi signals. Our bodies are made of water and radio signals hate water. With a lot of bodies in one area, like what you would find in an open office setting, multiple access points are a must to make sure signals can spread properly and that the required capacities can be supported.

Multiple Wireless Access Points Best Practices

It’s clear that there can be many reasons why you would need to set up multiple wireless access points on the same network. The best step you can take is to hire a WiFi service provider like Made By WiFi to do the job for you but if you elect to take on the project yourself here are some best practices for you to follow.

1. Conduct a wireless site survey before setting up your WiFi
A best practice when setting up multiple wireless access points in any situation is to conduct a wireless site survey. The wireless site survey essentially takes all the guesswork out of your WiFi setup and gives you a clear plan of attack on where you should mount your access points. Conducting a site survey also can help you figure out how you should configure your APs for the most optimal performance. Without a site survey, you are essentially going into your wireless network installation blind and may create issues with overlapping access points and misconfigurations.

2. Use a controller to manage all of your access points
Wireless access point controllers come in many versions. Some are on-site controllers that live wherever your access points are deployed. Other controllers can be cloud-based and can be used to manage multiple access points across various separate locations. Controllers software can also live right on the access point itself. Regardless of what type of controller you use, the benefits are clear – the controller will let you control all of your grouped access points through one interface. You will be able to assign a single SSID and password to all of your access points instead of having to join different networks every time you move between rooms or floors.

The controller helps to keep order within your network as well. From automatic channel management to seamless roaming, the controller will make all the difference if you need to set up multiple access points on the same network. (Our recommendation is Cisco Air 2504 Wireless LAN Controller )

3. Choose the correct access point placement
The wireless site survey should help you figure out the ideal locations to place your access points but perhaps you skipped that step and are winging it. The old method of placing access points is to position them in the center of every room where WiFi is needed. This approach could work but is definitely not the smartest method of installing access points, especially if your business heavily depends on WiFi to conduct its day to day operations.

The smarter approach is to place access points in the areas where WiFi will be used the most. High-density areas which require strong wireless signals should be addressed first and remaining areas where wireless coverage may not be as important should be addressed after. This approach favors capacity over coverage and is the trend that wireless network installations are moving in. Check out some tips for professional wireless access point installation in our prior blog post.

4. Keep ethernet cable under 328 feet when connecting access points
Now that you’ve conducted your wireless survey and figured out where to mount your access points you will need to run Cat5 or Cat 6 ethernet cable to the access points. It’s very important that you keep these cable runs under 328 feet or else you risk dropping packets which will negatively impact wireless internet performance. In fact, most wireless networking professionals limit cable runs to about 300 feet in order to accommodate the extra couple of dozen feet that may be needed for patching.

If you do need to run a cable past 328 feet you’re not completely out of luck. You simply need an active component like a small, inexpensive switch that will live somewhere before the 300-foot mark and allow you to extend the cable run by another 328 feet. There are situations where you may need to run a cable for an even longer distance. In this case, you may elect to use fiber optic cable which can be run for several miles in some instances. It’s important to review the costs associated with these cable runs as well as they can get very pricey as the distances increase.

5. Use the correct access points for indoor and outdoor use
Your WiFi network may require some outdoor coverage and in instances like this, you should elect to use outdoor access points to get the job done. It’s possible that wireless signal from your indoor access points may reach your outdoor areas and could be sufficient for your needs but if not, additional access points may be required. Outdoor access points are able to ignore the elements and are resilient to most weather conditions and temperatures. We recommend Ruckus Wireless ZoneFlex T300 for outdoor use.

There may even be instances where you would use outdoor access points indoors such as refrigerated warehouses where temperatures are regularly kept below the freezing mark. Another benefit of outdoor access points is that they are condensation resistant and have internal heaters that allow them to withstand situations where indoor access points would have failed.

6. Pick the correct channels for your access points
Proper channel selection is essential for excellent wireless coverage. In most cases, you’ll want the access point controller to pick the correct channels for you. After all, this is what the controller is there for. When deploying multiple access points on the same network there is a chance that the coverage area from neighboring access points may overlap. Nothing wrong with this as long as the access points use non-overlapping channels. If the channels do overlap it could cause a situation where their access points interfere with each other. This can cause packet loss during browsing and a negative internet experience for those using your WiFi network.

If your access points are broadcasting on the 2.4 GHz band you have 11 channels that can be used and this provides for only three non-overlapping channels: 1,6, and 11. Because of this, the 2.4 GHz band is rarely used for high-density WiFi deployments. The 5 GHz band offers much more selection when it comes to non-overlapping channels and is the de facto favorite for high-density wireless deployments utilizing multiple access points on the same WiFi network.

7. Pick the correct power settings for access points
Access point power settings help dictate how large a coverage area each access point is responsible for. If coverage cells are too large and have major overlap with each other, it can cause roaming issue where devices stay stuck to access points that are further away even though there are access points nearby that have a stronger signal. By utilizing a controller, it’s likely that the power levels of the access points will be controlled automatically but in certain high-density deployments, some human intervention may be required in order to perform manual power selection. This is where the findings from your site survey come in handy as you’ll have the information you’ll need to fine tune the access points to your unique network environment.

Improve Your Multiple Access Point WiFi Network

There are many reasons why you would need to use multiple access points on your wireless network. Whether you’re trying to enhance coverage within your office space or support a larger capacity of devices, the 7 best practices in this blog will help you figure out the smartest approach to doing so. If you still need help, contact the wireless specialists at Made By WiFi for a professional wireless network consultation.

How is WiFi Installed?

WiFi usually requires Cat 6 wiring to and from the wireless devices on your network. We will run a dedicated Cat 6 network lines to each wireless access point. We will plan how many access points, extenders, indoor/outdoor AP’s you will need to fully cover your home or business.

When do I need a range extender WiFi?

Answer – You need a Wifi extender if you have a large house with multiple floors. For example, if the router is on the ground floor, you may increase the Wifi coverage vertically for the rooms upstairs.

Best WiFi Extenders :

NETGEAR Nighthawk WiFi Mesh Extender EX7000
Nighthawk WiFi Mesh Extender EX7000
Check Price
Customer Favorite
If you are sick of wandering into dead spots throughout your home, this powerful WiFi extender and its trio of antennas will solve your connectivity problems.

Features 5 Gigabit Ethernet ports. Speedy Dual-Band coverage. Consistently strong signal eliminates dead spots. Optimized for mobile devices, gaming consoles, and smart TVs. Easy set up.

A bit pricey, but worth the investment.

TP-Link RE650 AC2600 Wi-Fi Range Extender
RE650 AC2600 Wi-Fi Range Extender
Check Price
Easiest to Use
If you need to eliminate a small- to mid-sized home’s Wi-Fi blind spots, this decently priced Wi-Fi extender helps with that and provides lightning-fast internet speeds.

Reliably covers a large area. Optimized for 4K content and smooth gaming. Simple set up. Consistently speedy Wi-Fi speeds. Beamforming where a strong signal is needed the most.

This relatively chunky socket-based style might be a deal breaker for some.

NETGEAR WiFi Range Extender
WiFi Range Extender
Check Price
Simple Yet Solid
This is worth a look if you’re on a budget but want an effective WiFi extender.

Great price, especially for what you get. Sets up in seconds; surprisingly adept at eliminating dead spots and boosting range. Addition of an Ethernet port for directly attaching wired devices such as video game consoles is a plus.

Easy to set up, but instructions are not much help if you do run into trouble.

NETGEAR Orbi Pro SRS60 Wi-Fi range extender DC power
Orbi Pro SRS60 Wi-Fi range extender DC power
Check Price
Most Comprehensive
Perfect for an office or home Wi-Fi network, an Orbi Pro system is a snap to set up and customize to fully blanket your space with a reliable and lightning-fast connection.

Extremely simple to extend a Wi-Fi network. Each Satellite extends a network 2,500 feet in any direction. Wireless installation. Ultra-high speed Wi-Fi. Excellent security suite.

An expensive, but rock-solid Wi-Fi extender system.

TP-Link AC1750 WiFi Range Extender
AC1750 WiFi Range Extender
Check Price
Trusted Brand
A reliable WiFi extender that offers good coverage and is easy to set up and use.

Provides decent WiFi expansion thanks to its 1750 Mbps. Works well in small or large homes. Simple to set up, and has a reliable signal indicator to help you find the strongest WiFi spot in your home.

Although rare, some issues with connectivity to routers have been reported. Occasional lag, especially when it comes to gaming.